Create Project Need help?
  • PROJECT STATUS
  • CREATION PERIOD
  • BADGE
Latest comments
ElektorLabs
ElektorLabs 9 minutes ago
For more resources you may want to read this summary of the Arduino COVID-19 conference.
Keep on Making!
piero25
piero25 17 hours ago
Zapper  
Keep on Making!
Sascha Löbbert
Sascha Löbbert 1 day ago
Hey, that looks good. I am going to install my Weatherstation the next days as weather gets warmer. But first only with Windspeed and direction and the Bme280. 
Firmware update ESP32 Weather Station (180468)
PeterN
PeterN 1 day ago
Hi Stepdes, you see theese lines in the beginning of the code:play.setup 0,64 'play.setup 1,64 ' external DAC, max Buffer Second line is for external DAC and commented out at the moment with ' Change that to  ' play.setup 0,64 play.setup 1,64 ' external DAC, max Buffer  And after a powerdown of the module the next start should be with digital output. Look at he help file of annex32 with F2-Key while you are in the script. There you will find a description of wiring PCM5102. But i  found there is a twist of to pins there!I found a different connection scheme than in the ANNEX help file.   The LCK/LRC- and BCK/BCLK- pins at  the ESP32 appear to be reversed.  This works here on my board for ESP32 and  PCM5102A: Lck <--> ESP32  GPIO26   (helpfile says wrongly IO05 is LRCK) BCK <--> ESP32 GPIO05  (helpfile says wrongly GPIO26 is BCLK) Din <--> ESP32 GPIO02   (OK) VCC <--> ESP32 V5  (5Volt) FLT, DMP, SCL, FMT <--> ESP32 GND XMT <--> 3V3 I append a foto that shows my ESP32Board and a PCM5102A I hope that will help you. Good luck and stay save! PETER  
M5Stack/ESP32 Internet Radio with ANNEX32-RDS
gabo93
gabo93 1 day ago
Buenas podria compartir las Conexiones del PMS7003 y El scetch Que suo porfavor  
Portable dust pollution display with temp and Humidity: