6 to 12 volt converter

6 to 12 volt converter via diode D3. In theory, therefore, the final effect of the circuit is to treble the input voltage, but in practice C6 will only attain a somewhat lower voltage, which ithnts taken revealed depends on the load. Measureme a that a 6 V lead-acid battery w of 7.2 V, produced an output voltage of 18 V with no load connected, but with a load of 750 mA this There are an amazing number of VW Beetles and Fords on the road which still operate on a 6 V battery. In such vehicles (and motorcycles) there are always problems when trying to install a modern car radio as they require a power supply of at least 10.7 V. One solution is to incorporate a 6 to 12 V converter of the type described here. This simple converter provides an output of around 700 mA and of them consumed more than 500 mA and is relatively inexpensive to construct. These two characteristics — simple and cheap — arise from the concept of the circuit which contains two average volume a value of 300 mA ...