Wi-Fi/Bluetooth/USB shield for Platino and Arduino
Thou Shalt Communicate!
Gerber file
CAM/CAD data for the PCB referred to in this article is available as a Gerber file. Elektor GREEN and GOLD members can exclusively download these files for free as part of their membership. Gerber files allow a PCB to be produced on an appropriate device available locally, or through an online PCB manufacturing service.
Elektor recommends the Elektor PCB Service service from its business partner Eurocircuits or AISLER as the best services for its own prototypes and volume production.
TIP: your first PCB at AISLER is free up to €30 with using the coupon code ELCCBB at checkout.
The use of our Gerber files is provided under a modified Creative Commons license. Creative Commons offers authors, scientists, educators and other creatives the freedom to handle their copyright in a more free way without losing their ownership.
Components
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Resistors
R1–R11 = 1kOhm 5% 0.25W
R12,R13 = 47kOhm 5% 0.25W
Capacitors
C2, C3 = 100nF 50V, 5mm pitch
C5 = 220nF 50V, 5mm pitch
C1, C4 = 10µF 35V, 2.5mm pitch
Semiconductors
D1,D2,D3 = LED, green, 3mm diam.
T1–T4 = BC547C, TO-92 case
IC1 = MCP1825S-3302E/AB, 3.3 V voltage regulator, TO-220 case
Miscellaneous
JP1 = 6-pin pinheader, 0.1" pitch, straight
JP3,JP4 = 3-pin pinheader, 0.1" pitch, straight, w. 2 jumpers
JP2 = 4-pin pinheader, 0.1" pitch, straight
K1,K3, K4 = 8-pin stackable header, 0.1" pitch, vertical
K2 = 6-pin stackable header, 0.1" pitch, vertical
K5 = 6-pin (2x3) stackable header, 0.1" pitch, vertical
S1 = pushbutton, SPNO, through-hole, 6x6mm
Mod3 = BOB-FT232R USB-to-Serial Bridge, Elektor Shop # 110553-91, or USB-to-Serial cable, Elektor Shop # 080213-71 (5 V) or # 080213-71 (3.3 V)
Mod2 = Rayson BTM22x Bluetooth module
Mod1 = WIZnet WizFi2x0 Wi-Fi module
PCB # 120306-1
We buy at:
Discussion (0 comments)