At the occasion of productronica 2017 Elektor distributes 1000 free ESP32-PICO-KITs V4 from Espressif Systems.
ESP32-PICO-KIT V4 is a mini development board based on the ESP32-PICO-D4 SIP module produced by Espressif. For easy interfacing, all the I/O signals and system power on the ESP32-PICO-D4 are brought out through two 20 x 0.1” pitch header pads on both sides of the development board. To make the ESP32-PICO-KIT V4 fit onto mini breadboards, the header pads are populated with two 17-pin headers. The remaining 2 x 3 pads grouped on one side of the board beside the antenna are not populated. If required, the additional 2 x 3-pin headers may be soldered later by the user. The development board integrates a USB-UART Bridge circuit, allowing developers to connect the board to a PC’s USB port for downloads and debugging. For more information: Getting Started Guide.
Enter your contact details and the board will be sent to you within a few weeks*.
*Promotion valid until 30 November 2017 or stock (1.000 boards!!) exhausted. Shipment limited to Europe!