Article
Two Arms for the ARM
Extend the versatility of the SAM D20 Board
Components
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Component List: EEC/ECC Board
Resistors
R1–R8 = 10kOhm
Semiconductors
T1–T4 = BSS138
Miscellaneous
K1 = 20-way (2x10) pinheader receptacle, right-angled, 0.1’’ pitch
K2 = 14-pin (2x7) boxheader, 0.1’’ pitch
K3 = 4-way (2x2) pinheader receptacle, right-angled, 0.1’’ pitch
K4 = 10-pin (2x5) boxheader or 10-pin (2x5) pinheader (see text), 0.1’’ pitch
PCB # 140572-1 [6]
-2
Component List: EEC Board
K1 = 20-way (2x10) pinheader receptacle, right-angled, 0.1’’ pitch
K2 = 14-pin (2x7) boxheader, 0.1’’ pitch
PCB # 140572-2 [6]
Resistors
R1–R8 = 10kOhm
Semiconductors
T1–T4 = BSS138
Miscellaneous
K1 = 20-way (2x10) pinheader receptacle, right-angled, 0.1’’ pitch
K2 = 14-pin (2x7) boxheader, 0.1’’ pitch
K3 = 4-way (2x2) pinheader receptacle, right-angled, 0.1’’ pitch
K4 = 10-pin (2x5) boxheader or 10-pin (2x5) pinheader (see text), 0.1’’ pitch
PCB # 140572-1 [6]
-2
Component List: EEC Board
K1 = 20-way (2x10) pinheader receptacle, right-angled, 0.1’’ pitch
K2 = 14-pin (2x7) boxheader, 0.1’’ pitch
PCB # 140572-2 [6]
We buy at:
Discussion (0 comments)