| The circuit described in this article is, in principle, an add-on for the popular Picture-in-Picture (PIP) Processor featured in the Octob...
| The circuit described in this article is, in principle, an add-on for the popular Picture-in-Picture (PIP) Processor featured in the Octob...
| Digital audio signals normally use a two-complement code. To invert such a signal, it is sufficient to invert all data bits in the left-h...
| The potentiometer introduced by Panasonic a little while ago is of a quality exceeded only by the Iikes of the Penny & Giles potentiomete...
| The compander is continuously variably from 2: 1 compression to 1:2 expansion. This requires a linear stereo potentiometer or, for stereo...
| A-weighted filters are often used in sound measurements and in signal-to-noise measurements in audio engineering. In these types of measu...
| Many audio amplifiers are still fitted with one or two inputs Ior a dynarnic pick-up. Since record players are used less and less frequen...
| The proposed filter consists of two series-connected used-order sections. The resistors used are E96 types with a tolerance of 1%. Their...
| The chip on wh ich the amplifier is based, a Type LM3876, is a member of the Overture family from National Semiconductor. All members of...
| The accelerating sales of Dolby Surround Sound equipment shows that spatial sound is very much appreciated by music audiences. During the...
| The matching circuit consists of a variable passive attenuator and an amplifier with variable gain: 0-20 dB. The attenuator reduces the s...