Elektor Team (9517)

€5 / Members: Free

| Many X- Y plotters, particularly the DlY type, have, for all sorts of reason, no protection against incident light, so that the phototrans...

€5 / Members: Free

| Adequate decoupling of power rails of most circuits is a seriously underestimated necessity. Particularly in the design of printed-circui...

€5 / Members: Free

| Silicon General's Type SGI548 is an integrated circuit capable of monitoring up to four positive DC supply voltages simultaneously for ov...

€5 / Members: Free

| This straightforward circuit, based on four darlingtons, enables a d.c. motor to rotate clockwise or anti-clockwise under the control of two...

€5 / Members: Free

| The LM3915 from National Semicanductor contains virtually everything for making a simple, yet reliable, audio power meter with a bar-type...

€5 / Members: Free

| Most power supplies, particularly switchmode types, are not designed to provide output voltages smaller than a volt or two. lt is often d...

€5 / Members: Free

| With circuit values as shown, this charger allows up to seven series-connected NiCd batteries to be charged. This number may be increased...

€5 / Members: Free

| The voltage regulator in portable, batteryopera ted equipment must have minimum dissipation, good temperature stability, and be able to d...

€5 / Members: Free

| Sine wave oscillators normally generate near-perfeet sine waves, but the stability of their output signal is often not very good. The circui...

€5 / Members: Free

| Siemens' Type PID20 is a passive infra-red detector that transforms heat radiation into electrical pulses. Adding two opamps and some mis...