Elektor Team (9517)

1-07-1975 | This circuit uses a start/stop oscillator and a monostable multivibrator. The monostable is triggered by the trailing edge of the pulse t...

1-07-1975 | This circuit uses a start/stop oscillator and a monostable multivibrator. The monostable is triggered by the trailing edge of the pulse t...

1-07-1975 | Electronics is beginning to establish a firm foothold even in the world of music, as is evident from the introduc- tion by SGS-Ates of tw...

1-07-1975 | The M 253 exhibits a number of basic differences in comparison with the M 252. In the first place the chip is simpler, as the binary prog...

1-07-1975 | Many different methods are followed to generate mains synchronised pulses. This circuit employs an opto-coupler to give complete isolatio...

1-07-1975 | Many different methods are followed to generate mains synchronised pulses. This circuit employs an opto-coupler to give complete isolatio...

1-07-1975 | Many different methods are followed to generate mains synchronised pulses. This circuit employs an opto-coupler to give complete isolatio...

1-07-1975 | Many different methods are followed to generate mains synchronised pulses. This circuit employs an opto-coupler to give complete isolatio...

1-07-1975 | Transistors Tl and T2 form a voltage amplifier with a high input impedance and a low output impedance. When the # slider of preset pot...

1-07-1975 | Transistors TI and T2 form a direct- coupled voltage amplifier. Resistor R6 and diodes D l /D2 determine the quiesc- ent current of the qu...