About the article

Wire Tracer (Receiver)

Based on a Labs project | October 2011 | Find it here
The circuit depicted is the receiver device of a transmitter/receiver combination that will prove extremely handy when tracing the path of electrical wiring in a building or to locate a break in a wire.The corresponding transmitter may be found elsewhere in this issue. The transmitter produces a distinctive tone which alternates between 2100 Hz and 2200 Hz.The matching receiver for the wire tracer is possibly even simpler than the transmitter, as is shown by the schematic. It consists of no more than a short wire antenna (a piece of wire, 10 cm long is adequate), a high-pass filter (C1-R1), an amplifier stage (IC1), an output stage (T1) and a loudspeaker. The prototype used a high impedance loudspeaker from a telephone handset, and this worked remarkably well.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Loading comments...