- on Computer/Software/Internet
- Published in issue 7/2010 on page 86
Network Wiring Tester
(Summer Circuits 2010 article)
Like all its counterparts, this network wiring tester comprises two elements, a transmitter unit, powered and fitted at the network start point, and a receiver unit, passive, which can be moved around from socket to socket. Each of these units carries eight LEDs, identically labelled 1 to 8. By operating a push-button in manual mode, or using a clock in automatic, the eight LEDs light up in sequence on the transmitter unit and obviously they should do the same on the receiver unit.
Already a member? click here to log in.