More about amplifier (484)

1-03-1988 | to provide new mounting holes on the PCB if you intend to use Type N or F sockets instead of BNC. Mount a suitable clamp to the box to enabl...

1-01-1988 | 38 EE: janua 198IVIMICS REVOLUTIONIZE WIDEBAND RF AMPLIFIER DESIGN A small 4-pin device that, together with a few external passive component...

1-10-1987 | EE 36 October 1987 LOW-NOISE MICROPHONE PREAMPLIFIER A quality preamplifier that can be configured for low and high impedance, as well as ba...

1-10-1987 | EE 44 October 1987 RECORDING/PLAYBACK AMPLIFIER This amplifier enables accompanying slide presentations with stereo commentary or music whil...

1-07-1987 | Although the use of SMDs (sur- face mount devices) is not yet widespread among electronics hobbyists, and the availability of these parts is...

1-07-1987 | 1 R3 This design answers the need for an inexpensive, yet good quality, preamplifier equipped with a tone control section. Fig. 1 shows the...

1-07-1987 | EE JULY/AUGUST 1987 To answer the need for a com- pact amplifier that is capable of satisfactory operation when driven from a compact disc p...

1-07-1987 | EE JULY/AUGUST 1987 A linear RF amplifier can be made in two ways: (1) with the aid of a linear active element, or (2) with a non-linear ele...

1-07-1987 | The majority of modern AF power amplifiers drive the loudspeaker(s) with a voltage that is simply a fixed factor greater than the input volt...

1-07-1987 | The Type TDA1521 from Valvo/ Mullard is an integrated HiFi stereo power amplifier de- signed for mains fed appli- cations such as stereo TV....