About the article

Battery charge/refresh station - part 2:

construction, adjustment and practical use

Based on a Labs project | October 2011 | Find it here
Battery charge/refresh station - part 2:
Last month’s article, which describes the features and circuit diagram of the battery charge/refresh station, clearly suggests that completing such a project, with peak charging currents of up to 8 A, is a bit more demanding than for a device with fewer automatic features and relatively lower performance. The construction information given here is thus especially important if you wish to obtain a good result. In addition to descriptions of the construction and the microprocessor-controlled, menu-driven alignment procedures, you will find many helpful, practical tips regarding battery charging and maintenance.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Loading comments...