- on Test & Measurement
- Published in issue 4/2009 on page 52
C Display
Programming the M16C graphic board in C

Our May 2008 issue featured a very straightforward graphical control and measurement device using the compact M16C Display Board and its built-in BASIC interpreter. Readers who prefer programming in C can also use the design if they build this mini circuit and download some free software from the Web.
CAM/CAD data for the PCB referred to in this article is available as a Gerber file. Elektor GREEN and GOLD members can exclusively download these files for free as part of their membership. Gerber files allow a PCB to be produced on an appropriate device available locally, or through an online PCB manufacturing service.
Elektor recommends its business partner Eurocircuits as the company of choice for its own prototypes and volume production in selected cases.

Capacitors
C1-C5 = 1?F 16V
Semiconductor
IC1 = MAX232CPE
Miscellaneous
K1 = 9-way sub-D socket (female)
K2 = 10-way AMP Micro-MaTch connector, PCB mount
JP1 = jumper
S1 = press-button switch
PCB, ref. 080422-1 from www.thepcbshop.com