Grégory Ester
About the article

A String of 160 RGB LEDs

A colourful display

A String of 160 RGB LEDs

Colours are not just mood indicators, apparently they can also lift or dampen your general mindset to a degree. If you want to attract attention during some event, decorate a shop window, or add a bit of ambience to a party, you can do all this and more with this high-tech light string — and what’s more, it’s self-adhesive.

Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Gerber file

CAM/CAD data for the PCB referred to in this article is available as a Gerber file. Elektor GREEN and GOLD members can exclusively download these files for free as part of their membership. Gerber files allow a PCB to be produced on an appropriate device available locally, or through an online PCB manufacturing service.

Elektor recommends its business partner Eurocircuits as the company of choice for its own prototypes and volume production in selected cases.

Download the BOM list
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
R1, R2, R3 = 47 Ohm
C1,C2 = 10?F 25V radial, lead pitch 2.5mm
C3,C5 = 100nF, lead pitch 5mm or 7.5mm
C4,C6–C13 = 1?F 16V radial, lead pitch 2.5mm
IC1 = MCP1702-3302E/TO (TO-92)
IC2 = 74HC4050N (DIP-16)
LCD1 = LCD, graphic, Electronic Assembly type EA DOGM128X-6
Touchscreen, Electronic Assembly type EA TOUCH128-1
K5 = ZIF connector for touchscreen, Electronic Assembly type EA WF100-04S
Backlight module = Electronic Assembly type EA LED55x31-W (W=white, other colours availabe, see LCD1 datasheet [8])
K1 = 2-way pinheader socket, lead pitch 0.1 in. (2.54mm)
K2 = 5-way pinheader socket, lead pitch 0.1 in. (2.54mm)
K3 = 4-way pinheader socket, lead pitch 0.1 in. (2.54mm)
K4 = wire link or 2-pin pinheader with jumper, lead pitch 0.1 in. (2.54mm)
Jumper or switch for K4.
PCB # 100743-1

We buy at:

Loading comments...