Become a Member
Members Only​
Article

Isolated Analog Output for Arduino Uno

Isolated Analog Output for Arduino Uno
Isolated Analog Output for Arduino Uno
This project uses the Arduino Uno PWM output to realize a fully isolated analog output with a range of 0..5 V or more. The use of an averaged PWM signal is not comparable with a real DAC, but it has advantages of simplicity since it is sufficient to use an opto-coupler for isolating the digital PWM signal.
Log in here as a subscriber to read the article.

Continue reading this Elektor article?​

Try a digital membership (Green) for 6 months for only €5.33 per month.​​
  • Unlimited access to online Member Only articles
  • 3 new editions Elektor Magazine (digital)
  • More than 5000 Gerber files
  • 20% member discount on e-books (at elektor.com)
  • 10% member discount on Products (at elektor.com)
Try for 6 months.
Stops Automatically.
What is Elektor Exclusive?
 

Materials

Component list

Component List

Resistors

R1 = 330 Ω, ±5%
R2 = 5.1 kΩ, ±5%
R3 = 100 kΩ, ±5%
R4 = 100 kΩ, ±1% metal film

 

Capacitors
C1 = 100 nF, ceramic
C2 = 10 µF, 50 V Electrolytic
C3 = 200 nF, Mylar ±2%
C4 = 100 nF, Mylar ±2%

 

Semiconductors

IC1 = LM358 dual opamp
IC2 = LM78L05 regulator
IC3 = 6N136

 

Others

Arduino Uno board

Discussion (0 comments)

Embed Code