FNIRSI DPOX180H (2-in-1) 2-ch Phosphor Oscilloscope (180 MHz)
The FNIRSI DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500 MS/s and an analog bandwidth of 180 MHz. The measurement results are displayed on the high-contrast 2.8-inch IPS full-view LCD screen with digital fluorescence technology.
Features
- 2-ch handheld oscilloscope & DDS signal generator
- 180 MHz bandwidth
- 500 MS/s sampling rate
- 20 MHz signal generator
- Innovative digital trigger system
- Cursor measurement function
- 5 mV sensitivity
- 50000 wfm/s waveform refresh rate
- 2.8" IPS full-vision high-definition display
- Built-in 4.2 V/3000 mAh lithium battery
- Automatic shutdown setting
- High-voltage anti-burning protection
Specifications
Nummer of channels | 2
Analog bandwidth | 180 MHz
Maximum sampling rate | 500 MS/s
Input coupling | DC/AC
Rise time | 2.5s
Storage depth | 120 Kpts
Input impedance | 1 MQ-18 PF
Vertical sensitivity | 5 mV-10 V (1X)
Time base range | 5 nS~50 S
DC accuracy | ±2%
Time accuracy | +0.01%
Trigger detection | Digital trigger
Trigger mode | Auto/Single/Normal
Trigger edge | Rising/Falling
Measurement range | 40 mV~80 V (1X)
Screenshot storage | 90
Capture signal | 500
Screen size | 2.8 inch
Screen resolution | 320 x 240
Display technology | IPS full view
Expansion interface | USB transmission interface
Auto power off | 5 minutes - 2 hours
Firmware upgrade | Supported iso image upgrade
Charging requirements | 5 V/2 A
Battery capacity | 3000 mAh
Standby time | 3.5 hours at full charge
Signal Generator | 14 standard function signals
Waveform storage | 250 groups
Parameter measurement | 12 kinds
Dimensions | 135 x 90 x 40 mm
Analog bandwidth | 180 MHz
Maximum sampling rate | 500 MS/s
Input coupling | DC/AC
Rise time | 2.5s
Storage depth | 120 Kpts
Input impedance | 1 MQ-18 PF
Vertical sensitivity | 5 mV-10 V (1X)
Time base range | 5 nS~50 S
DC accuracy | ±2%
Time accuracy | +0.01%
Trigger detection | Digital trigger
Trigger mode | Auto/Single/Normal
Trigger edge | Rising/Falling
Measurement range | 40 mV~80 V (1X)
Screenshot storage | 90
Capture signal | 500
Screen size | 2.8 inch
Screen resolution | 320 x 240
Display technology | IPS full view
Expansion interface | USB transmission interface
Auto power off | 5 minutes - 2 hours
Firmware upgrade | Supported iso image upgrade
Charging requirements | 5 V/2 A
Battery capacity | 3000 mAh
Standby time | 3.5 hours at full charge
Signal Generator | 14 standard function signals
Waveform storage | 250 groups
Parameter measurement | 12 kinds
Dimensions | 135 x 90 x 40 mm
Digital Phosphor Oscilloscope
FNIRSI DPOX180H Oscilloscope uses the latest digital phosphor technology to overcome the traditional oscilloscope due to noise caused by the waveform burr feeling. Color temperature display function can more clearly see the distribution of the signal, probability characteristics and the rise and fall time of the step signal fast and slow. X-Y mode with digital phosphor technology for comparison of amplitude, frequency and phase of two groups of signals.
DDS Function Signal Generator
Built-in 20 MHz DDS function signal generator, with 14 kinds of standard function signals, output amplitude fixed at 1 VPP, sine wave frequency of 20 MHz, other waveform frequency of 10 MHz, adjustable frequency step of 1 Hz. Contains the original chopping technology, intercept part of the oscilloscope measurement of complex signals as the output signal of the signal generator, than the traditional signal generator hand-drawn signal more objective and realistic.
Included
- 1x FNIRSI DPOX180H phosphor oscilloscope
- 2x Probes (200 MHz)
- 1x USB power supply
- 1x USB cable
- 1x Manual