More about oscillator (542)

1-04-1988 | 12 Finally 2 Octave Control Lines y- Output of 3/8 Decoder " Note Control Lines " 355 op-amp 1111111111 An instrumentation amplifier is used...

1-10-1987 | EE 24 October 1987 current so the diodes must be dimensioned accordingly. All of these problems are eliminated by using the L4960 as a post...

1-09-1987 | 111ESEeptembe„987 SMA FM STEREO RECEIVER Surface mount chip Type TDA7021T from Valvo/Mullard is the recently introduced stereo version of...

1-09-1987 | Construction The network is most con- veniently constructed on the ready-made PCB Type 87109 shown in Fig. 5. The values of the components g...

1-07-1987 | In addition to the description elsewhere in this magazine of HC and HCT based R-C/L-C RI oscillators for use up to 20 MHz, this design brief...

1-07-1987 | EE JULY/AUGUST 1987 Two inverters, one resistor and one Capacitor are all that is required to make a HC(T)- based oscillator that gives reli...

1-07-1987 | from an idea by J W v Dijk Many monitor chassis currently offered by computer surplus stores have separate inputs for horizontal and vertica...

1-07-1987 | EE JULY/AUGUST 1987 After a longish absence from the semiconductor scene, the tunnel diode, also called Esaki diode, after its Japanese inve...

1-07-1987 | This AF oscillator can be built with only one active compo- nent, and draws so little current that it is conveniently fed from a 9 V (PP3) b...

1-07-1987 | 48 from an idea by R Shankar When designing oscillators, it is good practice to ensure minimum capacitance of the active element(s), since a...