| Published in Elektor Magazine issue 7/2015 on page 78 Hardware usedProject PCB 150169-1
TonGiesberts (84)
Members Only
| Designed by A. Rosenkränzer This 3-way filter is originally designed in conjunction with the power amplifier we published earlier (130007-1)...
Members Only
| Designed by A. Rosenkränzer This 3-way filter is originally designed in conjunction with the power amplifier we published earlier (130007-1)...
Members Only
![T-Board Audio Amplifier [150002-1]](https://cdn.xingosoftware.com/elektor/images/fetch/dpr_1,w_800,h_340,c_fit/https%3A%2F%2Fwww.elektormagazine.com%2Fassets%2Fupload%2Fimg%2Fpublic%2Foriginal%2Fdscn4183.jpg)
| Up until now we only had digital T-Boards. Why not an analog one? We asked ourselves what could be a useful circuit when experimenting with...
| Up until now we only had digital T-Boards. Why not an analog one? We asked ourselves what could be a useful circuit when experimenting with...
Members Only
| Project is updated: look for additional information in contribution Updated version 1.1 of Power Meter 140409-1 One of our projects is the P...
| Project is updated: look for additional information in contribution Updated version 1.1 of Power Meter 140409-1 One of our projects is the P...
Members Only
| A while back we made a little break-out-board with a ADS1115 A/D converter (140169-1). It has four inputs that can be used in a single-ended...
| A while back we made a little break-out-board with a ADS1115 A/D converter (140169-1). It has four inputs that can be used in a single-ended...
Members Only
| The initial purpose of this project is to connect our ECC bus to a USB interface. But the circuit is more than that. All I/O’s are connected...