Luc Lemmens (180)

1-11-2009 | It is about three years now since our lab migrated from Ultiboard/Orcad to Altium Designer CAD software for the drawing of engineering-level...

1-10-2009 | This kit, made by Cypress, has been designed so that users can easily become familiar with the flexibility and 'mixed signal' capabi...

1-07-2008 | In the 'DigiButler' instalments (Elektor 4&5 2008) Daniel Malik’s Turbo BDM Lite ColdFire interface (TBLCF) is mentioned; a low-cost...

1-04-2008 | This project employs a Freescale Coldfire micro and associated PC software that allows remote switching of electrical loads across networks...

1-04-2008 | It is impossible to imagine modern electronics without microcontrollers. What used to be done with combinational or sequential logic is now...

1-03-2008 | Here’s the first real-life application of ECIO modules introduced in the October 2007 issue of Elektor. An ECIO acts as the brains of a PLC...

1-02-2008 | Strange people they are, the editors and technicians at Elektor. And I count myself among them. They generally show greater enthusiasm for d...

1-12-2007 | The PCB drilling machine speed controller described in this issue generated quite a bit of discussion among the editorial staff. A glimpse b...

1-11-2007 | Here we discuss an entirely different type of development kit compared to what we are 'normally' accustomed to. Most kits consist of...

1-10-2007 | At the time of writing, we’re one month away from a change of premises for Elektor Electronics’ head office. And as with every relocation, i...