Elektor Team
About the article

Make your own front panels

Make your own front panels
When building your own electronic equipment, finishing the case with a smart looking front panel is often a problem. Because a ready-made front panel foil is rarely available through our Readers Services, most of you will be forced to produce one by yourselves. Fortunately, making your own front panels is relatively easy if you have a computer and a colour printer, or access to such a combination. In the Elektor Electronics laboratory, this technique is applied for finishing off prototypes which appear on photographs in the magazine.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Loading comments...