About the article

MCS08DZ60 Evaluation Board

(Summer Circuits 2010 article)

This development board around a 68HCS08DZ60 microcontroller from Freescale aims initially to be a platform for experimenting with the CAN bus. So it’s equipped with a CAN driver and the bus is available on a 3-way connector. The board also carries an RS-232 driver. Hence the microcontroller’s SCI1 port is available on a standard 9-pin female D connector. The CAN driver and the RS-232 driver can be disconnected from the microcontroller via jumpers.

Downloading of this magazine article is reserved for Elektor Members only.
Already a member? click here to log in.
Products
Loading comments...