Bert van Dam (13)

| This article details how to build your own I2C slave device using a PIC microcontroller, and how to control it with a Raspberry Pi. You lear...

| This Raspberry Pi HAT puts at your disposal 4 motor-control outputs for LEGO EV3 motors and 16 buffered I/O connections that can be used in...

| In this article we'll show you how to turn a strip of LEDs on and off via your tablet (or PC) with the help of Flowcode 6 and several E-bloc...

| In this article we will demonstrate how you can make a web page on a Raspberry Pi server, where the number of visitors is shown on the page...

| In this article we build a webserver on an Intel Edison and use it with a tablet to operate an LED while sitting on the couch. This simple p...

| If you've recently bought a Raspberry Pi B+ and want to use your SD card with the software from the previous version you run into two proble...

| The Raspberry Pi is normally programmed in Python. This is a powerful and easy to use language, but if you are more familiar with a language...

| This small article describes how to build your own I2C slave device using a PIC microcontroller, and how to control it with the Raspberry Pi...

| You don't have a Raspberry Pi, but you are nevertheless curious how this popular platform works? With the aid of the open-source processor-e...

| This project is built around an ARM microcontroller connected to the public telephone network. You can send commands to the microcontroller...