Karl-Heinz Domnick (5)

| Having built the PCB and secured it to the front panel, you should be ready to take the stepper motor control into use. This is best done...

| Over the past few years, we’ve witnessed a significant increase in the use of stepper motors. This result is largely due to technologica...

| Stepper motors have been with us since the early sixties and their significance has grown enormously over the past few years. They are...

| Despite its apparent complexity, the practical circuit of the SAB80C116 evaluation system is only marginally different from typical 8-...

| This is the first time Elektor Electronics presents a development system for a 16- bit microcontroller. We’ve chosen the SAB80C166, wh...