STRESS FREE AUTOMATED VEHICLE TURN SIGNAL WITH ESP8266 AND MPU6050
The goal of this project is to switch the vehicle turn signal right/left bulbs by itself and the driver is all free from the stress. Using MPU6050 six axis gyrometer cum accelerometer it is made possible to find the direction of movement of the four wheeler’s steering wheel or a two wheeler’s handle bar.
Description:
The existing manual indicator switching system is to be combined with our project. i.e The system operates in both manual and automated mode. The operation of the system is as follows,
1. Manual mode – The regular operation is carried out with respect to switching Left/ Right. This is used when the driver needs to switch on the indicators prior to turning the vehicle or when required.2. Automated mode – When the four wheeler’s steering or two wheeler’s handlebar is tilted towards left, then the left indicator lamp gets switched on and the same for right side. A).Corrective mode – When the driver switches the wrong side indicator, i.e switches left indicator and turns towards the right, the system bars the manual mode and switches the right indicator.
The existing manual indicator switching system is to be combined with our project. i.e The system operates in both manual and automated mode. The operation of the system is as follows,
1. Manual mode – The regular operation is carried out with respect to switching Left/ Right. This is used when the driver needs to switch on the indicators prior to turning the vehicle or when required.2. Automated mode – When the four wheeler’s steering or two wheeler’s handlebar is tilted towards left, then the left indicator lamp gets switched on and the same for right side. A).Corrective mode – When the driver switches the wrong side indicator, i.e switches left indicator and turns towards the right, the system bars the manual mode and switches the right indicator.
Discussion (0 comments)