About the article

GoNotify, a Flexible IoT Sensor Interface

Join the bubble

Based on a Labs project | December 2016 | Find it here
GoNotify, a Flexible IoT Sensor Interface
IoT; the Internet of Things; IIoT, connected devices, fridges… we keep hearing a lot about it. Industry watchers predict a huge market and billions of connected devices in a few years’ time, but you still have to walk over to a wall-mounted switch to turn on a light in your home. Now those dark days are over, because with GoNotify you too can connect whatever you like to the Internet.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Relevant websites
Extra info / Update
* Universal wireless sensor interface
* Supports Wi-Fi and ESP-Now
* Ultra low-power
* Arduino compatible
* Grove compatible
Component list
From the Store
160333-1: GoNotify PCB, unpopulated
160333-41: ATmega328PB microcontroller with bootloader
Component List
Default: 1206
R1,R5,R11 = 1kOhm
R2,R7,R8,R12 = 47kOhm
R3 = 976kOhm*
R4 = 562kOhm*
R6 = 56Ohm
R9,R10 = 4.7kOhm
R13 = 100kOhm
R15,R16 = 27Ohm
C1,C3,C5 = 10µF 16V, tantalum, 1206
C2 = 100µF 6.3V, tantalum, 1206
C4,C7,C10,C11 = 100nF, 0805
C6 = 1µF, 16V, tantalum, 1206
C8,C9 = 47pF, 0805
L1 = 4.7µH, Irms=1.72A, 0.082Ohm
D1 = BAT760
LED1 = green, 2012
T1,T3,T4 = NTS2101PT1G
T2 = 2N7002
IC1 = ATmega328PB-AU
IC2 = MCP1642D-ADJ*
IC3 = NCP1117ST33T3G
IC4 = FT230XS
BUZ1 = buzzer, 12mm diameter, 6.5mm pitch
K1 = 2-pin pinheader, 0.1" pitch
K2 = 8-pin (2x4) pinheader, 0.1" pitch
K3 = Micro USB Type AB connector
K4 = 8-way (2x4) pinheader socket, 0.1" pitch
K5 = 6-way miniature DIN socket or 4-way Grove connector*
RE1 = reed switch, glass length 15mm max.
SW1,SW2 = tactile switch, SMT, 6.2x6.2mm
Battery holder, 2x AA (Keystone 2462)
ESP-01S ESP8366 Wi-Fi module
PCB # 160333-1
* see text
Loading comments...