Elektor Academy and element14 have teamed up to bring you a series of exclusive webinars covering blockbuster projects from recent editions of Elektor magazine. Participation in these webinars is completely free! All you need to do is register via the link below.
This webinar opens a window on the "AVR Software Defined Radio" course started in Elektor’s March 2012 editions. The first article describes signal generation using the DDS principle and N/N+1 division, as well as methods of generating AM and FM modulated signals in the low frequency range. The next article describes sampling and mixing. Down-sampling and the short conversion time of the AVR’s ADC allow signals up to 500 kHz to be digitized. The course covers demodulation of AM, FM and PM signals as well as clock-recovery and error detection. Combining these techniques allows many signals to be received on the receiver getting built as the course progresses.
AVR Software Defined Radio
Date: Thursday March 29, 2012
Time: 15:00 BST (16:00 CET)
Presenter: Martin Ossmann (Elektor Contributor)
Get your antennas on the roof and tune in! Register for this webinar now! Places are limited so book soon to make sure you don’t miss out!