The ME910G1 enriches the Telit xE910 product family by a high-performance LTEM and NB-IoT combo module. With optimized power consumption and enhanced quality of coverage it is specifically tailored for low data throughput IoT applications and enable new low-cost IoT device deployments. The ME910G1 is available at www.rutronik24.com.

For energy-saving operation the ME910G1 LTE UE Cat M1/NB2 module offers a Power Saving Mode (PSM) and extended Discontinuous Reception (eDRX). This feature allows the device to wake up periodically, delivering only the smallest amounts of data necessary before returning to sleep mode. Enhanced coverage, enabled by maximum coupling loss (MCL) of up to +15dB/+20dB, provides superior in-building penetration compared to earlier cellular LTE standards. Compliant with 3GPP Release 14, the ME910G1 has an increased date rate for LTE-M and NB-IoT and thus further optimizes the efficiency. The module is also available with an embedded GNSS-receiver.

The ME910G1 is offered with global frequency bands configuration for global deployment and supports 2G fallback. With a common form factor of 28.2 x 28.2 x 2.2 mm as well as common electrical and programming interfaces the Telit xE910 product family allows developers to implement a “design once, use anywhere” strategy. 
These advantages make the ME910G1 ideal for enabling quick implementation of LTE technology where low cost and low power are more relevant than high speed. Therefore, the module is particularly suitable for global IoT applications such as smart metering, security & surveillance, point of sales, health monitoring, fleet management, asset tracking and wearable devices.

You will find more information on the Telit LTE Cat module on the e-commerce platform www.rutronik24.com (where you can also place orders directly):
https://www.rutronik24.com/search-result/nojs:1337/qs:ME910G1/reset:0