| In this second part in our series of articles on the design of analogue filters, we will look at active filters. The inductors that are used...
| In this second part in our series of articles on the design of analogue filters, we will look at active filters. The inductors that are used...
| This series of three articles deals with the design of analogue filters. The first part covers the basic theory with an emphasis on practica...
| Do you want to measure not only electrical signals but also optical signals? Then you need an optical probe that converts light intensity in...
| What’s this? A multimeter with a graphic display? That sounds interesting… The PeakTech 3440 can not only display measured values, but also...
| Upgrading the CPLD board: With an MAX10M08 CPLD as the core component, the board not only provides more logic elements than the previous ver...
| Basically, there are (just as with modern oscilloscopes) a number of standalone devices equipped with screens and proper push buttons, as we...
| CPLDs tend to have a large number of pins practically inaccessible to the soldering iron and so do not lend themselves readily to use in hom...
| For more than a hundred years ‘artificial light’ has almost exclusively meant incandescent lamps. However, the relatively low output of inca...
| Modern function generators are abundantly complex these days and unlike in analog times they offer far more functions. Studying the various...
| Sometimes you want to equip a device with a display that can do a bit more than just show basic status information or a couple of numeric va...