About the article

Digital function generator (2):

Digital function generator (2):
The only connection between the PLL board and the discretely designed analogue parts of the generator is via plugs and sockets K2. K5 and K8. Pin 1 of these connectors carries the 32 Hz- 3.2 MHz clock, which isconverted in the various sections to a 1 Hz- 100 kHz sinusoidal, reetangular or triangular signal. The other pins carry information about the selected decadic range.
Downloading of this magazine article is reserved for Elektor Members only.
Already a member? click here to log in.
Loading comments...