• on Miscellaneous Electronics
  • Published in issue 7/2004 on page 0
About the article

Reset IC with Selectable Voltages

Modern digital systems work with a supply voltage of +3.3 V, and sometimes they also need an additional, lower supply voltage, such as 1.8 V, 1.5 V or even 1.2 V. To generate a reset signal from these two voltages, it was previously necessary to use a separate reset IC for each voltage, and each IC had to be individually dimensioned for the voltage it monitored.
Downloading of this magazine article is reserved for Elektor Members only.
Already a member? click here to log in.
Loading comments...