About the article

ADS1115-eBoB

ADS1115-BoB

ADS1115-eBoB
As far as microcontrollers and some of their owners go the analog world out there first needs digitizing before it can be understood. This miniature but powerful ADC breakout board (BoB) does the job.
Downloading of this magazine article is reserved for Elektor Members only.
Already a member? click here to log in.
Components
Download the BOM list
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component List
Resistors
R1-R4 = 300? 1% 0.1W, SMD 0603
R5-R8* = 0? 1%, 0.1W, SMD 0603
R9,R10 = 10k? 1%, 0.1W, SMD 0603
R11 = 1 k? 5%, 0.1W, SMD 0603
*Fit one only; default = R5

Capacitor
C1 = 100nF 10%, 16V, 0603 X7R

Semiconductors
D1-D4 = HSMS-2822-TR1G (Avago Industries)
IC1 = ADS1115IDGST (Texas Instruments)

Miscellaneous
K1,K2 = 5-pin pinheader, 0.1” pitch
Alternatively, for breadboard mounting:
K1,K2 = 5-pin pinheader, through hole, 0.1” pitch, round pins, Harwin D01-9923246

Miscellaneous
Ready-assembled board: Elektor Store # 140169-91
Optional: PCB only, Elektor Store # 140169-1, v1.0

We buy at:

Loading comments...