| A current detector and a threshold switch are not sufficient when in comes to building an electronic fuse. Such a circuit would be trigger...
| A current detector and a threshold switch are not sufficient when in comes to building an electronic fuse. Such a circuit would be trigger...
| We begin with something very simple; one digital signal generator sending its one-bit signal to one logic gate. MCS refers to a digital si...
| This Teletext decoder consists of uncomplicated hardware and a program called VT6. It communicates with the PC via an I²C-interface. When...
| As we have seen in Part 2, the SPICE primitives, such as resistors, capacitors and voltage sources, are defined in a netlist by an appropria...
| The converter described in this article is, technically speaking, state-of-the-art as far as analogue-todigital conversion is concerne...
| The design, consisting of an electric microphone, amplifier, and moving-coil meter, arranges for the meter to give a reading that is lin...
| This circuit converts a serial pulse train into a sinusoidal output voltage consisting of 30 discrete steps. The 4-bit output of up/down...
| The AD8037 is a rather special opamp because its positive and negative inputs have internal clamps. The clamp at the negative input is e...
| Digital systems need an interface to communicate with the outside world. Since only voltage drops can be used by the hardware, auxiliary...
| The digital-to-analogue converter presented here could not be simpler. lt consists of the logic circuit of a printer port of a computer...