| Modular hardware enables us to create plug-and-play prototypes rapidly; all we need do is assemble predesigned building blocks. Exactly the...
Jens Nickel (182)
| To make accurate voltage measurements, you need an A/D converter (ADC) chip which has good resolution. The folks at Elektor have developed a...
| In the microcontroller world as elsewhere, learning by doing is a good approach. The Arduino Uno, which features especially low cost and a l...
| The FTDI FT311D is a flexible bridge that can interface your circuit to an Android smartphone or tablet. It offers options for seven digital...
| Tiny low power radio (LPR) modules operating at UHF ISM frequencies like 433 MHz and 868 MHz are available on the market that are ideal for...
| Very often a project will demand an external interface such as RS-232, USB or Bluetooth, and using a small ready-made module can reduce deve...
| The microcontroller board described here is particularly well suited to monitoring and control applications. The plug-in TCP/IP module allow...
| In the April edition we presented an expansion PCB for the Elektor Linux board and mentioned at the same time that this could be used with o...
| In the previous edition we described our modular ‘Embedded Firmware Library’ (EFL), written in the C programming language. This helps beginn...
| The modular EFL (Embedded Firmware Library) is not just another library aimed at ‘rapid application development’. It lets you write applicat...