Create project Need help?
Show more (2)
jcruz

Home Hidroneumatic Controlled by ESP8266 + MQTT + Web App

Status: Proposal
291
1
March 9, 2018
hidroneumatic-control-functional-block-1.png
Motivated by the constant lack of water supply in my city I have been forced to install a water tank that feeds a hidroneumatic so as to have water with enough pressure for the whole house.
Additional needs to install a pump for the rapid filling of the main tank at times when the water arrives with very little pressure. This project allows controlling:
  • Turn On/Off hidroneumatic pump.
  • Fill water tank using a litle pump until full sensor detects full tank and stop pump.
  • Fill water tank with water came from street when the pressure helps, until full sensor detects full tank and close the solenoid valve.
  • When the water tank is close to emptying empty sensor activate the buzzer alarm and stop all pumps.
  • Deactivate all devices.
  • Turn on/off pumps room light.
  • Detect movement and turn on pumps room light and turn off after 15 seconds.
  • See all display info at an LCD display or remotely in LCD Status at web page.

All activities executed with help of :
  • 3 solenoid valves (blue color)
  • Full sensor
  • Empty sensor
  • Water pump (red color)
  • Hidroneumatic Pump (red color)
Read the full post
Show less
SPECIAL WEBLINKS
Images & Videos

Loading comments...