Luc Lemmens
About the article

T-Board Wireless

T-Board Wireless
Wireless links are becoming increasingly common in microcontroller circuits. Adding a wireless module to a project can come in handy when you’re working on a circuit design, for example on a breadboard. For this we have developed a convenient T-Board that is suitable for various types of wireless module.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Relevant websites
Download the BOM list
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Component List
R1,R2 = 330Ohm 5% 0.1W, SMD 0603
C1,C2 = 1µF 10V 10%, SMD 0603
D1,D2 = LED, red, 20 mA, SMD 0805
IC1 = XC6206P332PR, 3.3V voltage regulator, SMD SOT-89-3
K1,K2 = 10-pin pinheader, 0.1” pitch
K3 = 6-pin pinheader, 0.1” pitch
Mod1 = 2 pcs 10-pin pinheader socket, 2mm pitch
S1,S2 = pushbutton, PCB mount, 6 x 6 mm
Wireless module, e.g. Ciseco XRF [1] or Dig XBee ZB-module
PCB # 140374-1 or
Ready assembled board excluding wireless module: Elektor Store no. 140374-91

We buy at:

Loading comments...