Elektor Team
About the article

Compact USB to Serial Converter

Using the FT232H

Compact USB to Serial Converter
The “legacy” serial port is still used a lot for interfaces between electronic devices and PCs. Here we present a compact implementation, based on the FT232H IC from FTDI, which can be connected over USB 2.0 after you install the right drivers. That gives you USB High Speed capability.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Relevant websites
Extra info / Update
USB 2.0 High Speed
Pin compatible with the FTDI-USB-TTL (UART) cable
Right-angle USB connector for space-saving mounting
Selectable 3.3 V or 5 V supply voltage on the output connector
Automatically recognized as a COM port (after installation of VCP drivers [3])
Download the BOM list
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.

We buy at:

Loading comments...