About the article

ARM’ed T-Board

Here’s Cortex-M0+ 32-bit power

Based on a Labs project | July 2015 | Find it here
ARM’ed T-Board
While 8-bit microcontrollers remain the bread and butter of the enthusiast and maker communities, there is a growing interest in 16- and 32-bit microcontrollers. Without doubt, the most popular emerging architecture is the ARM Cortex-M — a core that nearly all the major manufacturers include in their microcontroller line-ups.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Relevant websites
Download the BOM list
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Component List
SMD 1206, 1%, 0.125W
R1 = 10kOhm
R2 = 330Ohm
C1 = 100µF 25V 20%, radial
C2,C8 = 10µF 25V 20%, radial
C3,C4,C5,C6,C7 = 100nF 50V, X7R, 1206
L1 = BLM18PG471SN1D ferrite bead, 0.2Ohm/1A, 470Ohm @100MHz
D1 = 1N4007 (1000V, 1A)
LED1 = LED, red, SMD 1206
IC2 = LD1117S33CTR (3.3V LDO voltage regulator)
IC3 = PRTR5V0U2X (ESD protection diode)
S1 = switch, tactile, 24V, 50mA, 6x6 mm
JP1,JP2,JP3 = jumper, 1x2, vertical, 0.1’’ pitch
F1 = 500mA PTC resettable fuse
K1 = DC barrel jack 2.1mm pin
K2,K3 = 14-way pinheader, SIL, 0.1’’ pitch
K4 = 10-way (2x5) pinheader, 0.05’’ pitch
K5 = micro USB receptacle, 2.0 type B, SMD
jumper socket 0.1’’ pitch
PCB, Elektor Store # 150059-1
Alternatively: ready-assembled board, Elektor Store # 150059-91

We buy at:

Loading comments...