About the article

HangTux Mk. 2

Hangman on the Raspberry Pi

HangTux Mk. 2
Linux will always face a challenge. However, the emergence of many ‘minicomputers’ such as the Raspberry Pi (and variants), the Beagle Bone, the DragonBoard and the Odroid, which all use a Linux operating system, has given a healthy boost to the number of Linux users. If you haven't joined them yet, here is an interesting and simple application to get your teeth into: hangman.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Relevant websites
Component list

Component List

 

Resistors

R1,R4 = 1kΩ

R2,R3,R5–R10 = 180Ω

 

Capacitors

C1 = 10nF tantalum

 

Semiconductors

D1 = LED, red, rectangular, 5mm

D2,D3,D4 = LED, yelllow, rectangular, 5mm

D5–D8 = LEDd, green, rectangualr, 5mm

IC1 = MCP23S08, programmed

 

Miscellaneous

P1 = 2-pin pinheader, 0.1’’ pitch

K1 = 14-pi (2x7) pinheader, 0.1’’ pitch

PCB # 120456-1

Loading comments...