About the article

Raspberry Pi Prototyping Board

Make the RPi do things… Your Thing!

Based on a Labs project | December 2012 | Find it here
Raspberry Pi Prototyping Board
This article presents a prototyping board which can be used to make building your own interfaces and circuits for the Raspberry Pi easier.
Downloading of this magazine article is reserved for registered users only.
Login | Register now!
Relevant websites
Gerber file

CAM/CAD data for the PCB referred to in this article is available as a Gerber file. Elektor GREEN and GOLD members can exclusively download these files for free as part of their membership. Gerber files allow a PCB to be produced on an appropriate device available locally, or through an online PCB manufacturing service.

Elektor recommends its business partner Eurocircuits as the company of choice for its own prototypes and volume production in selected cases.

Download the BOM list
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
C1,C2 = 100nF
C3 = 10µF 25V, radial
D1 = 1N4001
IC1 = LM1117T-3.3
K1 = 2.1mm jack power connector, PCB mount
K2 = dual row 26-way (2x13) pinheader receptacle (socket); height = 10.8 mm (see text)
JP1,JP2 = 3-pin pinheader, 0.1’’ pitch, with jumper
PCB # 120483-1

We buy at:

Loading comments...