Interested in how to debug a flyback design by using an oscilloscope? Join a December 2 webinar with Würth Elektronik and Rohde & Schwarz to learn the basics (and lots more). Register today!
Interested in how to debug a flyback design by using an oscilloscope? Join a December 2 webinar with Würth Elektronik and Rohde & Schwarz to learn the basics (and lots more).Register today!
Webinar Overview
In this webinar, Robert Schillinger (Würth Elektronik) and Marcus Sonst (Rohde & Schwarz) will show you some basics about debugging a flyback design (input: 19V-30V, output: 5V/5A, switching frequency: 300kHz) by using an oscilloscope and what kind of additional equipment is needed. They will give you a deeper view into SMPSs and the source of noise, and what kind of filtering is necessary to get success in the EMC laboratory. At the end, you should be able to distinguish between DM (differential mode) and CM (common mode) and how you can determine the dominant mode.
Clemens Valens (Technical Manager, Elektor Labs) will guide the webinar and assist the presenters in taking questions from the webinar audience.
Robert Schillinger is Field Application Engineer at Wuerth Elektronik eiSos. With 14 years of professional experience in hardware design and over 6 years as an FAE, he has been on the road for customers in southern Bavaria since 2014 for advice and training on behalf of Wuerth Elektronik. The main topics here are EMC, power supplies and communication interfaces.
Marcus Sonst graduated in electrical engineering with a specialization in electrical power engineering from Dortmund University of Applied Sciences. Mr. Sonst has 20 years of experience in the development and testing of power supplies and electronic control units for lighting applications. Today, he works as an application engineer at Rohde & Schwarz and deals with the topic of power electronics and the necessary measurement technology.
Clemens Valens is the Technical Manager of Elektor Labs. He holds a BSc in Electronics and an MSc in Electronics and Information Technology. Valens started working for Elektor in 2008 as editor in chief of Elektor France, and he has also worked as an editor for Elektor UK/US and ElektorMagazine.com. He currently produces engineering tutorials and product reviews at Elektor.tv. In recent videos, Clemens covered the following topics and more: Arduino compiler optimizations, GitHub essentials, home automation, getting started with KiCad EDA, and several informative product reviews.
Don't miss this informative webinar. Register today!Following the webinar, there will be a Q&A session during which, selected viewers queries will be discussed and answered.
Marcus Sonst graduated in electrical engineering with a specialization in electrical power engineering from Dortmund University of Applied Sciences. Mr. Sonst has 20 years of experience in the development and testing of power supplies and electronic control units for lighting applications. Today, he works as an application engineer at Rohde & Schwarz and deals with the topic of power electronics and the necessary measurement technology.
Clemens Valens is the Technical Manager of Elektor Labs. He holds a BSc in Electronics and an MSc in Electronics and Information Technology. Valens started working for Elektor in 2008 as editor in chief of Elektor France, and he has also worked as an editor for Elektor UK/US and ElektorMagazine.com. He currently produces engineering tutorials and product reviews at Elektor.tv. In recent videos, Clemens covered the following topics and more: Arduino compiler optimizations, GitHub essentials, home automation, getting started with KiCad EDA, and several informative product reviews.
Discussion (3 comments)