| The MAX280 is a 5th-order all-pole instrumentation lowpass filter with no DC error. The filter uses an external resistor and capacitor to is...
| The MAX280 is a 5th-order all-pole instrumentation lowpass filter with no DC error. The filter uses an external resistor and capacitor to is...
| Designing, implementing and analyzing filters is a very difficult task for many electronics engineers. In fact, filter technology is one o...
| The strong point of the recently puhlished 'surround-sound subwoofer' is that its frequency response is straight down to 20 Hz. Such exc...
| The proposed filter consists of two series-connected used-order sections. The resistors used are E96 types with a tolerance of 1%. Their...
| A Bessel filter has a fairly constant transit time (delay) over the pass band, but its amplitude characteristic starts to fall off rather...
| The present filter has an amplification ofx2, so that R5 and R6 in the feedback loop can be equivalent. In other words, their ratio is n...
| The filter consists of two fourth -order sections in series. Various components in the second section have been given two different valu...
| The TLC247x family from Texas Instruments is aseries of integrated circuits specifically designed to make driving a loudspeaker with an...
| Maxim's MAX260/261/262 series of ICs contain two double filter sections of which the response can be set for each section individually...
| Motorola's Type TLC2201 low-noise precision opamp is probably not the best-known amplifier made in LinCMOS technology, but it is certain...