| CPLDs tend to have a large number of pins practically inaccessible to the soldering iron and so do not lend themselves readily to use in hom...
All items tagged with Gerber and Prototyping (9)
| The ELPB-NG measures 87.6 x 54.6 mm (3.45 x 2.15”), which is about the size of a cigarette pack, i.e. perfect for a 40-pin DIP package. Too...
| This article presents a prototyping board which can be used to make building your own interfaces and circuits for the Raspberry Pi easier.
| Working on the principle that the simplest things are the ones we use the most, the author had the idea for the PICo PROto, a minimalist pro...
| This open-source & open-hardware project aims to be more than just a little board with a big microcontroller and a few useful peripherals —...
| This prototyping board provides an environment for the FPGA module that enables it to do something useful. That gives you an opportunity to...
| Designing a circuit always involves several somewhat disagreeable tasks, such as soldering, looking up the pinouts of ICs and laying out a m...
| The development of a PCI based expansion card is relatively complex and usually needs a large investment of time and money before success is...
